Table of Contents
Advertisement
TETHER LINE HOLDER MUST
WEAR PROPER EYE PROTEC-
TION
ECHO ATTACHMENTS & ACCESSORIES
ECHOMATIC
DUAL & SINGLE LINE SEMI-AUTOMATIC FEED LINE HEADS
ECHO REPLACEMENT
NYLON MONOFILAMENT
TRIMMER LINE
24
BLADE-THROWN
STUMP SECTION
TM
NYLON CUTTING LINE HEADS
4-STRING MANUAL FEED
LINE HEAD
If a tether line is used to insure that a tree falls away from the blade,
the line holder must wear proper eye protection and attire, and be
no closer to the tool that 15 meters (50 feet).
Be very careful when recutting cleared areas. If the blade can not cut
clear through a short stump, it may tear it off and hurl it back at high
speeds.
TM
Echomatic
nylon line heads are standard on most ECHO GT or
SRM series units. The line feeding action of the Echomatic
is called semi-automatic because the operator has to activate the
head by tapping it on the ground. A plastic debris shield with cut-
off knife must be used with a semi-automatic feed line head.
Manual feed nylon heads are standard on some units, and optional
for all units. They require the use of appropriate debris shield as
identified in the operator's manual for the specific units.
If replacement of the cutting head assembly is ever necessary,
install the assembly recommended in your operator's manual or unit
parts list.
WARNING
All heads must be used with a plastic debris shield.
TM
head
DANGER
Advertisement
Table of Contents
