Dell 7330dn - Laser Printer B/W System Administration Manual page 71

PJL Command
@PJL XPERSONALJOB
@PJL XPROOFJOB
@PJL XSAVEDJOB
@PJL XSECUREJOB
@PJL XIGNOREFF
@PJL XLINETERMINATION=value
@PJL XMBFSIZE=value
@PJL XMEDIASOURCE=value
@PJL XMEDIATYPE=value
@PJL XPCLTRAYSWITCH=value
@PJL XPCLPAPERSRCx = y
Dell 7330 Mono Laser Printer System Administrator Guide
Values Description
n/a Starts a Personal Print job.
n/a Starts a Proof Print job.
n/a Starts a Saved Print job.
n/a Starts a Secure Print job.
ON, OFF Ignores FormFeed commands when
printing PCL blank pages.
ON, OFF Terminates a line.
ANY or any Sets the media size for Tray 1.
supported media
size, such as
LETTER,
STATEMENT, and
EXECUTIVE
ANY, TRAYn Sets the media source.
ANY or any Sets the media type.
supported media
type, such as PAPER
and LABEL
ON, OFF Switches trays when a tray becomes
empty. If AutoSelect is chosen as
the paper source (tray) in PCL, then
tray switching is always active,
regardless of the value. When the
current tray becomes empty, the
printer attempts to switch to another
tray containing the same size and
type of paper. This command only
takes effect when a specific tray,
such as Tray 2, is selected in the job.
When this command is ON, tray
switching still occurs when the tray
becomes empty. When this
command is OFF, no switching
occurs and the user is prompted to
load paper.
x is 0, 1, 2, 3, 4, 5, 6, Overrides the tray selected in the
7, 8, 20, 21, 22, 23, <Esc>&l#H PCL tray selection
which is the number commands.
in the <Esc>&l#H
tray selection
commands
y is -1 for
AutoSelect, 0 for the
current tray (eject
page), 1 for Tray 1, 2
for Tray 2, etc., and
99 for the factory
defaults
B-6
Additional PJL Commands