Cloning - Dell 7330dn - Laser Printer B/W System Administration Manual

Cloning

Cloning enables you to configure one printer and then copy that configuration to another
printer on the same network. You can access cloning using the EWS to select the settings you
want to clone from one printer to another printer.
To clone settings from one printer to another printer using the EWS:
1. Launch your web browser.
2. Type your printer's IP address in the browser Address field.
3. Click Properties.
4. On the left navigation panel, select Clone Printer.
5. If prompted, type in your Admin or Key User name and password.
6. On the Clone Printer page, select the settings you want to clone from the source printer or
click Check All to select all the settings. The settings are:
802.1X
Custom Paper Types
DNS/WINS
E-Supplies
FTP
HTTPS
Input Trays
IPP
LPR
PCL
PostScript
Printing Security Settings
Security
SNMP
UPnP
Web Links
7. Type the IP address or DNS Name of the destination printer in the IP Address or DNS
Name field.
8. (Optional) To assign a printer name to the destination printer, type this name in the
Printer Name (SNMP System Name) field.
9. If the destination printer is located in a different domain/zone, modify the information in
the EtherTalk Zone and/or IP Domain Name fields.
10. Click the Clone Selected Settings button.
A list of the selected settings to clone is displayed.
11. Click the Clone button to clone the destination printer with the selected settings from the
source printer.
Dell 7330 Mono Laser Printer System Administrator Guide
Control Panel Lockout
Date and Time
Email Server
EtherTalk
Fuser
Information Forwarding
Interfaces
IPsec
Mail Alerts
Port 9100
Printer Defaults
Remote Printing
SLP
TCP/IP Settings
Usage Profile Properties
3-14
Cloning