Lenovo 06472AU User Manual page 34

2. Type correct password in the Enter Current Password field. Then press Enter
once to move to the Enter New Password field, type a new user password in.
3. Press Enter once to move to the Confirm New Password field. Retype the
password you just entered to verify it.
4. Commit your password to memory, and press Enter.
To remove the password, do the following:
1. Select Set User Password, and press Enter.
2. Type correct user password in Enter Current Password, and press Enter twice.
Note:
Make sure the Password on boot is set to Enabled if you need the password
protection at power on.
To set a Hard Disk Password:
Two types of the hard disk passwords help protect the information stored on the hard
disk:
v Hard disk master password
v Hard disk user password, which requires a hard disk master password
You need to set a master password and a user password both as the Hard Disk
Password. Either of the passwords can be used to get access to the Hard disk. Any
change or removal to the master password deletes the user password.
1. Turn on your computer. Press F2, while the initial screen is displayed. The BIOS
Setup Utility screen opens.
2. Select Security, using the cursor directional keys.
26
Lenovo IdeaPad S10 User Guide