Advertisement
Quick Links
Mobile Workstation!
5" & 8" skid steer Chippers!
The four-position valve easily controls
the hydraulic feed roller
The chipper has two mounts, so it can be
set to feed in front or to the curb side
Built-in hydraulic jack makes feed roller
maintenacnce quick and easy.
Model
Hydraulics
Feed Opening
Size
Standard or
5.5"x7"
CH500H
(74500)
high-flow**
CH800H High-flow***
9"x9"
(74800)
*Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
**Standard-flow requires a mimimum of 15 gallons per minute (GPM) hydraulic oil flow
***High-flow requires a mimimum of 25 GPM hydraulic oil flow
Chipper
Feed
Capacity
System
3"*
hydraulic
5"*
hydraulic
Find a dealer near you!
Call us at 800.247.7335 or
Log onto www.BearCatProducts.com
P.O. Box 849, West Fargo, ND 58078
Email: sales@BearCatProducts.com
Fax: 701.282.9522
Model CH500H (74500)
Chipper
Operating
Disc
Weight
20" x 1.25"
1145
140lbs
30" x 1.25"
1525
275lbs
Advertisement
Related Manuals for Echo Bear Cat CH500H(74500)
Summary of Contents for Echo Bear Cat CH500H(74500)
- Page 1 5" & 8" skid steer Chippers! The four-position valve easily controls the hydraulic feed roller The chipper has two mounts, so it can be set to feed in front or to the curb side Built-in hydraulic jack makes feed roller maintenacnce quick and easy.
- Page 2 SKID-STEER MOUNT •CH500H (74500) fits skid steers with stan- dard or high-flow hydraulics •CH800H (74800) fits skid steers with high-flow hydraulics •Two mounts, so chipper can be mounted with feed table facing forward or to the curbside •Easy to attach just connect chipper to the SAE J2513 Quick- Tach, attach the hydraulic hoses, and you are ready to go HYDRAULIC FEED •Four-position manual valve control ( Re- verse-Neutral-Forward-Reverse). •Infinite speed settings with turn of a handle •Automatic feed control, which slows the feed roller if the disc starts to slow down CHIPPER DISC •CH500H (74500) has a 20" x 1.25" [51cm x 3.175cm] 140lb. [63.5kg] disc. Machined. •CH800H (74800) has a 30" x 1.25" [76cm x 3.175cm] 275 lb. [125kg] disc. Machined & Balanced. FOUR CHIPPING BLADES •Reversible heat-treated chipper steel blades, with chrome content. •Blades are mounted 90 degrees to each other for smoother operation and less vibration. FOUR EDGE ADJUSTABLE ANVIL/CUTTER BAR To insure good chipping ability. CONTINUOUS CHIPPING SIZE •CH500H (74500) has a 5.5" x 7" [14cm x 18cm] chipper open- ing for side limbs, and wil chip up to 3" limbs continuously. •CH800H (74800) has a 9" x 9" [23cm x 23cm] chipper open- ing for side limbs, and will chip up to 5" limbs continuously.