Software Download Process - Cisco AJ732A - MDS 9134 Fabric Switch Release Note

Software Download Process

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Table 1 Cisco MDS 9000 Family Supported Software and Hardware Components (continued)
Component Part Number
2
CWDM DS-CWDM-xxxx
DS-CWDM-MUX-4
DS-CWDM-MUX-8
DS-CWDMCHASSIS
Power supplies DS-CAC-6000W
DS-CAC-2500W
DS-CDC-2500W
DS-CAC-3000W
DS-CAC-4000W-US
DS-CAC-4000W-INT
DS-CAC-1900W
DS-CDC-1900W
DS-CAC-845W
DS-CAC-300W
CompactFlash MEM-MDS-FLD512M MDS 9500 supervisor CompactFlash disk, 512 MB.
Port analyzer DS-PAA-2, DS-PAA
adapter
CD-ROM M90FM-CD-212=
1. SFP = small form-factor pluggable
2. CWDM = coarse wavelength division multiplexing
3. W = Watt
Software Download Process
Use the software download procedure to upgrade to a later version, or downgrade to an earlier version,
of an operating system. This section describes the software download process for the Cisco MDS
SAN-OS and includes the following topics:
•
•
•
•
•
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(3)
6
Description
Gigabit Ethernet and 1-Gbps/2-Gbps Fibre Channel SFP
LC interface xxxx nm, where xxxx = 1470, 1490, 1510,
1530, 1550, 1570, 1590, or 1610 nm.
Add/drop multiplexer for four CWDM wavelengths.
Add/drop multiplexer for eight CWDM wavelengths.
Two slot chassis for CWDM add/drop multiplexers.
6000-W AC power supply.
2500-W AC power supply.
2500-W DC power supply.
3000-W AC power supply.
4000-W AC power supply for US (cable attached).
4000-W AC power supply international (cable
attached).
1900-W AC power supply.
1900-W DC power supply.
845-W AC power supply.
3
300-W
A standalone Fibre Channel-to-Ethernet adapter that
allows for simple, transparent analysis of Fibre Channel
traffic in a switched fabric.
MDS 9000 Management Software and Documentation
CD-ROM, spare.
Determining the Software Version, page 7
Downloading Software, page 7
Selecting the Correct Software Image for an MDS 9500 Series Switch, page 8
Migrating from Supervisor-1 Modules to Supervisor-2 Modules, page 9
Configuring Generation 2 Switching Modules, page 9
AC power supply.
Applicable Product
MDS 9000 Family
MDS 9513 only
MDS 9509 only
MDS 9506 only
MDS 9200 Series only
MDS 9100 Series only
MDS 9500 Series only
MDS 9000 Family
MDS 9000 Family
OL-12208-05