Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Reference page 258

8
trapClientCount 1.3.6.1.3.94.2.2
trapClientCount 1.3.6.1.3.94.2.2
The current number of rows in the trap table.
trapRegTable 1.3.6.1.3.94.2.3
A table containing a row for each IP address/port number to which traps are sent.
trapRegEntry 1.3.6.1.3.94.2.3.1
IP/port pair for a specific client.
Index
trapRegIpAddress
trapRegPort
trapRegIpAddress 1.3.6.1.3.94.2.3.1.1
The IP address of a client registered for traps.
trapRegPort 1.3.6.1.3.94.2.3.1.2
The UDP port to send traps to for this host. Normally this would be the standard trap port (162). This
object is an index and must be specified to create a row in this table.
Set to 162.
trapRegFilter 1.3.6.1.3.94.2.3.1.3
This value defines the trap severity filter for this trap host. The connUnit sends traps to this host that
have a severity level less than or equal to this value. The default value of this object is Warning. The
mapping between errorlog severity level and this variable is:
Table 8-3
System Error Log
errshow command
none (0)
Critical (1)
Error (2)
Warning (3)
Info (4)
Debug (5)
This severity applies to all entries. See
8-44
FA-MIB
unknown (1)
critical (4)
error (5)
warning (6)
info (8)
debug (9)
Table 8-1 on page
FcEventSeverity in
8-7.
Fabric OS MIB Reference
Publication Number: 53-1000241-01