Brocade Communications Systems A7990A - StorageWorks SAN Director 4/16 Blade Switch Reference page 224

8
connUnitType 1.3.6.1.3.94.1.6.1.3
The Brocade implementation maps the switch WWN to the top 8 octets of this variable and sets the
remaining lower 8 octets to 0.
Example:
If Brocade's switch WWN is 10:0:0:60:69:10:02:18, then use the SNMP GET command on
connUnitGlobalId.10.0.0.60.69.10.02.18.0.0.0.0.0.0.0.0 returns:
10 00 00 60 69 10 02 18 00 00 00 00 00 00 00 00
connUnitType 1.3.6.1.3.94.1.6.1.3
The type of this connectivity unit.
Set to 4 (switch).
connUnitNumports 1.3.6.1.3.94.1.6.1.4
Number of physical ports (between 0 and the maximum number of system supported ports) in the
connectivity unit (internal/embedded, external).
To determine the maximum number of system supported ports, use the SNMP GET command on
swFcPortCapacity.
The SilkWorm switches support 0 to maximum number of system supported ports.
The maximum number of supported ports are as follows:
SilkWorm 3200, 3250
SilkWorm 4012
SilkWorm 200E, 3800, 3850
SilkWorm 3900, 4100
SilkWorm 4900
SilkWorm 7500
SilkWorm 12000
SilkWorm 24000
SilkWorm 48000
connUnitState 1.3.6.1.3.94.1.6.1.5
Overall state of the connectivity unit.
Values Possible values are:
•
unknown (1)
•
online (2) Set the state to online.
•
offline (3) Set the state to offline.
Mapped as follows:
switchState(ONLINE)
8-10
8 ports
12 ports
16 ports
32 ports
64 ports
32 ports
128 ports
128 ports
256 ports
2 (online)
Fabric OS MIB Reference
Publication Number: 53-1000241-01