Figure 65 Creating An Sid/Did Performance Graph - Brocade Communications Systems A7533A - Brocade 4Gb SAN Switch Base Administrator's Manual

8
Advanced performance monitoring graphs
3. Click a port from the Slot/Port or Sid/Did Selection List.
4. Click a source ID from the Port or Sid/Did Selection List, and click Add Sid. You can also type a
5. Click a destination ID from the Port or Sid/Did Selection List, and click Add Did. You can also
6. Click OK.
7.
126
FIGURE 65
Creating an SID/DID performance graph
NOTE
Only the FC ports of the launched switch display in the tree. The All Devices tab lists all the
devices in the fabric and lets you select the source and destination. Slot and port information
of other switches is not displayed in the tree.
a. Drag the selected port into the Enter/drag slot, port number field.
b. Click Retrieve preset EE monitors.
The current end-to-end monitors for that port are displayed in the "Current EE monitors set
for selected port" table.
c. Optional: To display a performance graph for the current EE monitors set for the selected
port, click a SID-DID pair in the table. You can select multiple Source ID and Destination
IDs. Click Select. If you selected multiple SID/DID monitors, click OK in the confirmation
dialog box that appears. Skip to
for the current EE monitors set for the selected port, continue with
source ID in the Enter/drag SID number field.
type a destination ID in the Enter/drag DID number field.
If you selected multiple EE monitors, SIDs, or PIDs, a confirmation dialog box displays,
reminding you that one graph will be opened for each selection. Click Yes to display the
graphs.
When you close a graph, a dialog box asks if you want to save the monitor. If you click OK, the
monitor is saved, and will persist if the switch is rebooted.
step 6. If you do not want to display a performance graph
step 4.
Web Tools Administrator's Guide
53-1001194-01