Print Head Deep Cleaning - Canon iP6220D - PIXMA Color Inkjet Printer Direct Printing Manual

Print Head Deep Cleaning

If print quality does not improve by standard print head cleaning, try print head deep cleaning,
which is a more powerful process. Print head deep cleaning consumes more ink than standard
print head cleaning, so perform this procedure only when necessary.
1
Ensure that the printer is on.
2
Start print head deep cleaning.
(1) Press the Menu
(2) Use the
button.
(3) Use the
(4) Use the
The confirmation screen is displayed.
(5) Use the
Do not perform any further operation until the print head deep cleaning
finishes. This takes about 1-2 minutes.
After print head deep cleaning finishes, print the nozzle check pattern to verify
that the print head nozzles are clean.
See "Printing the Nozzle Check Pattern" on page 49.
If the problem persists, perform the print head deep cleaning again.
If the problem persists, the printer may have run out of ink.
See "Replacing a FINE Cartridge" on page 54.
If the problem continues to exist, the printer may be damaged. In this case,
contact the Customer Care Center.
52
Menu button. Menu Menu
buttons to select Maintenance/settings
buttons to select Maintenance
buttons to select Deep cleaning
buttons to select Yes
Maintenance/settings and then press the OK
Maintenance/settings Maintenance/settings
Maintenance and then press the OK Maintenance Maintenance
Deep cleaning and then press the OK
Deep cleaning Deep cleaning
Yes and then press the OK
Yes Yes
OK button. OK OK
OK button.
OK OK
OK button.
OK OK
OK
OK OK