Canon iP6210D - PIXMA Color Inkjet Printer Printing Manual page 32

About "Layout" and "Trimming"
For Layout Layout, when you have selected Default
Layout Layout
the printer operates based on the PictBridge setting screen.
When printing onto Photo Stickers (PS-101) (16-up), use the following
settings.
By default, Off Off (No trimming Off Off
About "Image optimize"
When you have selected Default
operates based on the PictBridge setting screen.
If you use a Canon PictBridge-compliant device, you can select VIVID
Face Face. (Note that these options cannot be selected for some models.) Face Face
About "Date/File No. print"
By default, Off Off is selected for this printer. Off Off
If you select an image which has had the shooting date embedded in it using a camera
with print mode, select Off
date and/or file number will be printed over the embedded date.
28
1. Load Photo Stickers (PS-101) in the auto sheet feeder.
2. Select 10 x 15 cm/4" x 6" 10 x 15 cm/4" x 6" for the Paper size
10 x 15 cm/4" x 6" 10 x 15 cm/4" x 6"
type type type. type
3. Select N-up N-up for Layout
N-up N-up
Some PictBridge compliant devices display the Layout
4-up 4-up, 9-up 9-up, and 16-up
4-up 4-up 9-up 9-up
If there are no options on the PictBridge compliant device that
correspond to 2-up, 4-up, 9-up, or 16-up, printing on stickers is not
possible.
No trimming) is selected for Trimming No trimming No trimming
Default (selections based on the printer setting), the printer Default Default
When VIVID VIVID is selected, green and blue portions of photos are printed
VIVID VIVID
vividly.
When NR NR (Noise Reduction) is selected, noise in blue portions, such as NR NR
the sky, and dark portions is removed.
When VIVID+NR VIVID+NR is selected, functions of both VIVID VIVID+NR VIVID+NR
performed.
When Face Face is selected, backlit images are corrected when printed. Face Face
Off for this function. If you select Date
Off Off
Never disconnect the USB cable during printing.
When disconnecting the USB cable between the product and printer,
follow the device instructions given in the Instruction manual.
Controls of the digital camera cannot be used for the following:
- Print quality setting
- Printer maintenance
For the device operation method and troubleshooting, refer to your
device's manual.
For print error messages, see "Cannot Print Properly from the Digital
Camera" on page 50.
Default (selections based on the printer setting),
Default Default
Paper size, and Photo
Paper size Paper size
Layout, then select 16
Layout Layout
16-up. In this case always select 16-up
16-up 16-up
Trimming. Trimming Trimming
Photo for the Paper
Photo Photo
16.
16 16
Layout Layout option; 2-up Layout
16-up.
16-up 16-up
VIVID, NR NR, VIVID+NR
VIVID VIVID NR NR
VIVID and NR VIVID VIVID NR NR are NR
Date, File No. File No., or Both
Date Date File No. File No.
Paper
Paper Paper
2-up, 2-up 2-up
VIVID+NR, or
VIVID+NR VIVID+NR
Both, the
Both Both