Maxtor Personal Storage 5000DV User Manual page 22

Install D
Install your drive as described in "Step 2. Connecting the Drive"
1.
on page 7. When you connect the drive to your computer, the
Add New Hardware wizard appears, click Next.
2
2. The Install Hardware Device Drivers screen appears.
Select the option to search for a driver, click Next.
3. The Locate Driver Files screen appears. Clear all options
and click Next.
You are asked if you want to disable this device. This option
is referring to the Maxtor OneTouch feature. Select the
Disable Device option and click Next or Finish.
Finish the driver install.
4.
Your drive is now ready to use.
When using the unplug/eject icon on the taskbar, a reference
to the Maxtor 1394 Storage Front Panel will appear under
hardware devices. You can ignore this reference when you
disconnect your drive from the Windows operating system.
Install E
1. Install your drive as described in "Step 2. Connecting the
Drive" on page 7.
When you connect the drive to your computer, the
Add New Hardware wizard appears.
2. Select the option to Install software automatically and
click Next.
You may see a message "Connect and search for the
software on the Internet." Select No, do not connect to
the Internet now. Then click Next.
18 Installing the Drive
The next screen will tell you it cannot install the hardware.
3. Select the Don't prompt again option and click Finish.
4. Disregard the warning message that appears.
If a window appears "Help & Support Center," disregard
5.
this screen and close the window.
Your drive is now ready to use.
Install F
Install your drive as described in "Step 2. Connecting the
1.
Drive" on page 7. When you connect the drive to your
computer, the Add New Hardware wizard appears.
Select the option Automatic search.
2. Insert the Maxtor Install CD into your computer's CD-ROM
drive.
3. The wizard will locate the proper driver. Click Finish.
Your drive is now ready to use.
To Install Retrospect at a Later Time
If you wish to install a complete copy of Retrospect Express
software and the Maxtor OneTouch feature at a later time, you
can do so by following the original installation instructions
provided in this guide – Steps 1 – 3 on pages 5 – 13.