Installing Drivers Only - Maxtor Personal Storage 5000DV User Manual

Installing Drivers Only

This section describes how to install your new drive without
installing Retrospect Express software.
"
The Maxtor OneTouch button feature will not function if
you choose to install under this option.
Locate your operating system and the interface you plan to use
in the following table and follow the corresponding installation
procedure in this section.
OS USB
Install A
Windows 98SE
Install C
Windows Me
Install C
Windows 2000
Install C
Windows XP
Install C
Mac OS 9 and X
Install A
1. Install your drive as described in "Step 2. Connecting the
Drive" on page 7. When you connect the drive to your
computer, the Add New Hardware wizard appears,
click Next.
Select the option to Search for a Driver, click Next.
2.
3. Insert the Maxtor Install CD into your computer's
CD-ROM drive
4. Select the option to Specify a location and click the
Browse button.
5. A new window appears called Browse for Folder.
• Double click on the Maxtor CD icon in this window
showing the drives and folders on your system.
• Open the folder titled Drivers located on the Maxtor
Install CD and select the USB folder inside this folder.
Click the OK button at the bottom of this window.
• Now click the Next button on the Add New Hardware
Wizard screen.
6. Your system will search the CD for the proper driver. To
install this driver, click Next.
FireWire
7. After a few moments your system will finish the driver
Install B
installation, click Finish.
Install F
Your drive is now ready to use.
Install D
Install B
Install E
1. Install Microsoft's 1394 Storage Supplement as described in
Install C
"I want to install the Windows 98SE Storage Supplement"
on page 31.
Install your drive as described in "Step 2. Connecting the
2.
Drive" on page 7.
Your drive is now ready to use.
Install C
Install your drive as described in "Step 2. Connecting the
1.
Drive" on page 7.
Your drive is now ready to use.
Installing the Drive 17
2