NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch Admin Manual page 41

Gs716tv2/gs724tv3 software admin manual
Hide thumbs Also See for GS724Tv3 - ProSafe Gigabit Managed Switch:
Table of Contents

Advertisement

Table 2-4. SNTP Global Configuration Fields
Field
Version
Supported Mode
Last Update Time
Last Attempt Time
Last Attempt Status
Server IP Address
Address Type
Server Stratum
Reference Clock Id
Server Mode
Configuring System Information
GS716Tv2 and GS724Tv3 Software Administration Manual
Description
Specifies the SNTP Version the client supports.
Specifies the SNTP modes the client supports. Multiple modes may be
supported by a client.
Specifies the local date and time (UTC) the SNTP client last updated
the system clock.
Specifies the local date and time (UTC) of the last SNTP request or
receipt of an unsolicited message.
Specifies the status of the last SNTP request or unsolicited message for
unicast mode. If no message has been received from a server, a status
of Other is displayed. These values are appropriate for all operational
modes:
• Other: None of the following enumeration values.
• Success: The SNTP operation was successful and the system time
was updated.
• Request Timed Out: A directed SNTP request timed out without
receiving a response from the SNTP server.
• Bad Date Encoded: The time provided by the SNTP server is not
valid.
• Version Not Supported: The SNTP version supported by the server
is not compatible with the version supported by the client.
• Server Unsynchronized: The SNTP server is not synchronized with
its peers. This is indicated via the 'leap indicator' field on the SNTP
message.
• Server Kiss Of Death: The SNTP server indicated that no further
queries were to be sent to this server. This is indicated by a stratum
field equal to 0 in a message received from a server.
Specifies the IP address of the server for the last received valid packet.
If no message has been received from any server, an empty string is
shown.
Specifies the address type of the SNTP Server address for the last
received valid packet.
Specifies the claimed stratum of the server for the last received valid
packet.
Specifies the reference clock identifier of the server for the last received
valid packet.
Specifies the mode of the server for the last received valid packet.
v1.0, July 2009
2-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs716tv2

Table of Contents