Linksys SPA942 - Cisco - IP Phone Release Note page 2

Release Notes for SPA942 and SPA962 IP Phones Firmware Version 6. 1 .3
•
Contact header in 18X messages for Application Server features
The Contact Header is now included in all 18X messages. This enhancement
improves the interoperability of the phones with Application Server features
that use the contact header to identify the endpoint interaction.
•
Busy display information for 486 Busy Here message
This feature enables the phone to display the word "Busy" when receiving a
486 Busy Here message as response to an INVITE.
•
VLAN and priority tagging on phone data port (802. 1 p/q)
This feature facilities tagging of the VLAN ID (802. 1 Q) and priority bits (802. 1 p)
of the traffic coming from the PC port of the SPA9x2 phone. Three new
parameters are included with the feature:
Parameter
<Enable_PC_Port_VLAN_Tagging>
<PC_Port_VLAN_ID>
<PC_Port_VLAN_Highest_Priority>
Description
Yes/No (default No). Enables or disables
the tagging algorithm.
0-4095 (default 0). Value of the VLAN ID.
The phone tags all the untagged frames
coming from the PC (it will not tag frames
with an existing tag).
0-7 (default 0). The priority applied to all
frames, tagged and untagged. The phone
modifies the frame priority only if the
incoming frame priority is higher than this
value.
Release Notes
2