Page 2
Mobility Kit for Xpress ™ and RoadyXT ® User Manual...
Page 3
Congratulations and thank you for purchasing the Mobility Kit for Xpress and RoadyXT from Belkin. Now you can turn your Delphi RoadyXT or Audiovox Xpress into a truly portable XM receiver and keep the music playing anytime on the go.
Page 4
How to Attach the TunePower to your XM Receiver There are two sleeve sizes and matching spacers included: Delphi RoadyXT and Audiovox Xpress. Select the appropriate sleeve and spacer for your XM Plug-n-Play receiver. Attach the spacer for your XM receiver �����...
Page 5
How to Attach the TunePower to your XM Receiver Attach the form-fitted sleeve to the � XM Plug-n-Play receiver by sliding the receiver into the sleeve bottom first. Make sure that the dock connector on the bottom of the receiver is on the same side as the TunePower’s cable and dock connector, and then slide the receiver into the TunePower sleeve.
Page 6
It can also be attached to an XM-radio-mounting solution, such as the Belkin TuneDok® for XM (sold separately). To remove the clip, firmly push against Fig. 6 the tabs as shown in the diagram.
Page 7
How to Remove the Belkin TunePower XM from your XM Receiver For Xpress Receivers: ��� �� ������ ��� �������� ������ ���� ��� ������ ��� �� ������ ��� �������� ������ ���� ��� ������ ��� �� ������ ��� ������ ������� ���� ��� ������...
Page 8
Operating the Belkin TunePower XM The Belkin TunePower for Delphi RoadyXT and Audiovox Xpress will provide four to five hours of playtime* *Performance may vary based on the XM Plug-n-Play receiver with which it is used. To check the remaining battery power level, press the button on the top end of the TunePower and let go.
Page 9
Charging the Belkin TunePower To charge the Belkin TunePower, connect the small end of the included AC wall charger into the DC-power-in jack on the side of the TunePower. Connect the AC wall charger into any US wall power outlet.
FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 11
Belkin Corporation warrants the Belkin product for three years. What will we do to correct problems? Product Warranty. Belkin will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product). What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin Corporation for inspection upon Belkin’s request at the sole expense of the purchaser, or...
Page 12
Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.