EAW VRS12 VRS18 Instruction Manual
  1. Manuals
  2. Brands
  3. EAW Manuals
  4. Subwoofer
  5. VRS12 VRS18
  6. Instruction manual

EAW VRS12 VRS18 Instruction Manual

Eaw passive subwoofer instruction manual
Hide thumbs

Advertisement

Table of Contents

VRS
VRS
Passive Subwoofers
INSTRUCTION MANUAL
12
18

Advertisement

Table of Contents
loading

Related Manuals for EAW VRS12 VRS18

Summary of Contents for EAW VRS12 VRS18

  • Page 1 Passive Subwoofers INSTRUCTION MANUAL...

  • Page 2: Safety Instructions

    When a EAW Commercial product capable of producing high sound levels is being used, it is therefore necessary to wear ear plugs or protective earphones when the limits shown in the table are exceeded.

  • Page 3: Table Of Contents

    14. Rigging Precautions: When mounting or suspending EAW Commercial loudspeaker enclosures, it is essential that load ratings, rigging techniques, and special safety considerations be appropriate for the installation. Use only the mounting/rigging points on the loudspeaker enclosure intended for this purpose. The user must determine the load requirements, dynamic loading, and any other contributing factors affecting the loudspeaker installation.

  • Page 4: Introduction

    2. INTRODUCTION Congratulations on the purchase of your new EAW Commercial loudspeaker. You now own one of the finest professional audio products available – the result of exceptional engineering and meticulous craftsmanship. Please read these instructions to get the maximum performance from your new loudspeaker.

  • Page 5: Installation

    Although EAW Commercial will help in any way possible, it is always the responsibility of the receiving party to file any shipping damage claim. The carrier will help prepare and file this claim.

  • Page 6: Connections

    4. CONNECTIONS WARNING: To prevent the risk of electric shock, do not connect the loudspeaker with the amplifier switched on. The protective cover over the terminal strip is a safety feature per CE requirements. Replace this cover after making the signal connections. 1.
  • Page 7 • Use speaker cables that have markings to distinguish the polarity, such as insulation or conductors of different colors. • Before using the loudspeaker, carefully check that all the connections have been made correctly to make sure there are no accidental short circuits that could cause electrical sparks.

  • Page 8: Operation

    • Most EAW Commercial loudspeakers are capable of sound levels that can be damaging to human hearing. Take precautions so that audiences are not exposed to such levels.

  • Page 9: Specifications

    EAW Commercial continually engages in research related to product improvement, new materials, and production methods. Design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current EAW Commercial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.

  • Page 10: Dimensions

    VRS12 Dimensions and Mounting Points 2.46"(62.2) 11.82" (300.23) 15.50" (393.7) 30.00" (762.0) FRONT NOTES: 1. DIMENSIONS ARE IN INCHES, DIMENSIONS IN BRACKETS ARE MILLIMETERS. 2. DIMENSION TOLERANCE IS ± 0.1" (2.5 MM) 3. SYMBOL INDICATES MOUNTING POINT, 3/8 INCH-16 THREADED HOLE (PI ANGLE) VRS18 Dimensions and Mounting Points 20.88"...

  • Page 11: Performance Graphs

    PERFORMANCE GRAPHS VRS12 Impedance vs Frequency Fre q uenc y ( Hz ) VRS12 Axial Response vs Frequency Fre q uenc y ( Hz ) Processed: Before amplification, the audio signal is processed by the recommended high-pass, low-pass and EQ settings (see below).

  • Page 12: Troubleshooting

    • Loudspeaker is not working. Connect the loudspeaker cable to a known good loudspeaker, leaving all equipment set to the same levels. If the problem disappears, the loudspeaker is probably not working. Contact EAW Commercial Technical Support for appropriate troubleshooting.

  • Page 13: Service And Maintenance

    8. SERVICE and MAINTENANCE Maintenance Usually, your EAW Commercial loudspeaker will not require regular maintenance for normal use. However, you can do several things to keep your loudspeaker in good operating and cosmetic condition. • Testing: Periodically test your loudspeaker for proper performance. A simple test is to play a CD through it using well-defined, articulate, wide-range program material.
  • Page 14 Service If your loudspeaker should require servicing, please follow these instructions: 1. Call EAW Commercial Tech Support at 1-888-337-7404, 7 am to 5 pm PST (Monday-Friday), to verify the problem and obtain a Service Request Number. Be sure to have the serial number of the unit when you call. You must have a Service Request Number in order to obtain warranty service at the factory or at an authorized service center.

  • Page 15: Warranty

    Warranty: LOUD Technologies Inc. requires its authorized EAW Commercial distributors abide by the following warranty terms for all EAW Commercial brand products (all dates are from the date of delivery from an Authorized EAW Commercial Distributor to the end user/installation site): Loudspeakers –...
  • Page 16 EAW Commercial | One Main Street | Whitinsville, MA 01588 USA TEL toll free within US/Canada 888.337.7404 | TEL outside US 425.892.6503 | FAX 425.485.1152 www.eawcommercial.com © 2004 LOUD Technologies Inc. All Rights Reserved. EAW Commercial is a registered trademark of LOUD Technologies Inc.

This manual is also suitable for:

Vrs12Vrs18

Table of Contents

Save PDF