EAW SBX220 Specifications

FEATURES
• Highly compact companion subwoofer for all JFX products
• Unique baffle design and advanced transducers maximize
LF "punch"
• Low frequency response to 32 Hz
• Reinforced cup for pole mounting JFX loudspeakers
• Foot recesses for stable ground stacking in multiples
DESCRIPTION
The SBX220 is a compact, high-powered subwoofer with an
enclosure styled to complement JFX Series loudspeakers. It
contains two advanced 12 inch woofers mounted in a "clam
shell" driver arrangement, which provides tight driver coupling
to increase output. A massive port radiates the considerable
energy needed at the enclosure's tuning frequency to comple-
ment the JFX Series' high output.
The enclosure includes balance-optimized recessed handles
and rubber feet. A reinforced pole-mount receptacle allows
the SBX220 to double as a base for use with any JFX full range
system. The grille is internally braced to withstand the rigors
of portable use. The input connector for the SBX220 is a
Neutrik NL4 using pins 2+/-. The input is looped through to
a second NL4 for connection to additional SBX220s. Pins 1+/-
can be used for connection and loop through of the signals
for a companion full-range loudspeaker. This means a single
loudspeaker cable to the SBX220 can power both the sub-
woofer and full-range loudspeakers.
APPLICATION
The SBX220 is intended primarily for portable applications,
but it may readily be used in installations where space is
restricted. At only 18 inches high, it is very effective in houses
of worship, clubs, and theatres where subwoofers must be
installed under a low stage.
PERFORMANCE
Frequency Response (1 W @ 1 m)
±3 dB 38 Hz to 300 Hz
-10 dB 32 Hz
Axial Sensitivity (dB SPL, 1 W @ 1 m)
Sub Bass 98
Impedance (Ohms)
Sub Bass 4
Power Handling (Watts, continuous)
Sub Bass 1400
Recommended High-Pass Frequency
24dB/Octave 30 Hz
Calculated Maximum Output (dB SPL)
Sub Bass Peak 135
Sub Bass Long Term 129
One Main Street, Whitinsville, MA 01588
EAW products are continually improved. All specifications are therefore subject to change without notice.
Dimensions
Weights
Companion Systems
508 234 6158 Toll Free 800 992 5013
SPECIFICATIONS SBX220
PHYSICAL
System Configuration Dedicated subwoofer
LF Subsystem 2x 12 in cones, vented
Enclosure Materials Exterior grade Baltic birch plywood
Finish Wear-resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Hardware Pole mount cup for 1-3/8 in
Grille Powder coated perforated steel,
Height 18.0
Width 25.5
Depth 30.0
Net Weight 105
Shipping Weight 119
FAX 508 234 8251
SBX220/0006389/001/2 pp
diameter pole (4 ft length
recommended)
foam backed
inches millimeters
457
648
762
pounds kilograms
47.7
54.1
Any JFX full range loudspeaker
info@eaw.com www.eaw.com
February 2003 Printed in USA