Security > Mac Address Table > Static Mac - D-Link EasySmart DGS-1100-16 User Manual

D-Link EasySmart Switch User Manual
Figure 55 – QoS > Bandwidth Control
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Type: This drop-down menu allows you to select between RX (receive), TX (transmit), and Both. This
setting will determine whether the bandwidth ceiling is applied to receiving, transmitting, or both
receiving and transmitting packets.
No Limit: This drop-down menu allows you to specify that the selected port will have no bandwidth limit.
Enabled disables the limit.
Rate: This drop-down menu allows you to select data rate from 64Kbps to 512Mbps.
Click Apply to set the bandwidth control for the selected ports.
Security > MAC Address Table > Static MAC
This feature provides two distinct functions. The Disable Auto Learning Excluding Uplink Port table allows
turning off the function of learning MAC address automatically, if a port isn't specified as an uplink port (for
example, connects to a DHCP Server or Gateway). By default, this feature is Off (disabled).
31