Power Supply - Epson U325 - TM B/W Dot-matrix Printer User Manual

❏ Validation paper with holes (e.g., sprocket holes) within the
areas shown below must not be used. Otherwise, the paper
cannot be detected by the paper sensor. Translucent paper
must not be used.

Power Supply

Be sure to use a safety-standards-applied power source that meets
the following specifications.
Rated output: 24 V/2.0 A or more, Maximum output: 240 VA or
less
Inserting direction
: Holes are prohibited
in this area.
7mm (.28")
11mm (.43")
Reference Information 4-7