Operating The She5Am - Bosch SHX6AP05UC - 24' Ascenta Series Dishwasher Use And Care Manual

OPERATING THE SHE5AM & SHE5AL
@i@D
Child Lock
Active Clean Sanitized RinseAgent 3h. 6h. 9h.
_{!iCO!>( ]_i ({}
Half Load
,WARNING
-- Power -- Auto -- Regular -- Delicate -- Quick --------h
Scrub Wash Wash Wash Wash
Program Select
Delay
Start
(_ BOSCH .......
You could be seriously scalded if you allow hot water to splash
out of the dishwasher. OPEN THE DOOR CAREFULLY during any
wash or rinse cycle. Do not fully open the door until water noises
have stopped.
To Start Unit;
• Door must be closed. Press the "ON/OFF" button to turn the unit
on.
• The Countdown Display and one of the Wash Cycle Indicator
Lights will be flashing to show you are in the Wash Cycle selec-
tion mode.
• Press the "<" or ">" button to select the desired wash cycle.
• If desired select the "HALF LOAD" or DELAY START" features at
this point.
o In addition to your Wash Cycle selection, for small loads of
lightly soiled dishes press the "HALF LOAD" button. This will
save energy, water.
o If you would like to delay the start time of the dishwasher press
the "DELAY" button until the desired delay time (1-24 hrs.)
shows in the Countdown Display window.
• Press the "START" button to begin the cycle (Wash Cycle Indicator
Light will stop flashing)
Note: Rinse Agent Indicator Light will be illuminated if the unit needs
Rinse Agent.
Child Lock
• After pressing the "START" button you can activate the Child Lock
feature.
• Press and hold down the "<" button until "CL" appears in the
Countdown Display window. Now any button you press (except
ON/OFF) will not function and '%12will display each time.
• To deactivate, press and hold the "<" button until the "C12disap-
pears from the Countdown Display window.
To Cancel the Cycle:
• Press and hold the "STARTIRESET" button until the Countdown
Display reads "0:01".
• Wait until the Countdown Display reads "0:00" and turn the unit
off.
Note: You cannot cancel a cycle with the Child Lock feature
activated.
Setting Options (Rinse Agent Amount / Extra Dry Heat
Activation)
• Door must be closed. Press the "ON/OFF" button to turn the unit
on.
• One of the Wash Cycle Indicator Lights will be flashing to show
you are in the Wash Cycle selection mode.
• To enter the Options Setup Mode, press and hold down the ">"
button, then press and release the "START RESET"button, then
release the ">" button.
• The "Sanitized" Indicator Light will be flashing to show you are in
the Options Setup Mode.
• Press the ">" button to select the option you would like to ad-
just
o If the Countdown Display shows a "d:00" or "d:01" are ready to
turn your Extra Dry Heat option on/off.
o If the Countdown Display shows a "r:00" through "r:06" you
are ready to set the amount of Rinse Agent the unit will dis-
pense.
To Turn the Extra Dry Heat On or Off
• With the Countdown Display showing a "d:00" or"d:01" press the
"<" button to change the setting.
o "d:00" means the Extra Dry Heat is off.
o "d:01" means the Extra Dry Heat is on
• Press "START" to save your settings.
To Set the Amount of Rinse Agent Dispensed
NOTE: If your glasses have spots you need more Rinse Agent. If your
glasses have streaks you need less Rinse Agent.
• With the Countdown Display showing "r:00" through "r:06"
(r:00 = no rinse aid & r:06 = highest rinse aid) press the "<"
button to change the amount of Rinse Agent the unit will
dispense.
• Press "START" to save your settings.
• You are now ready to start a new cycle.
12