Loading The Dishwasher Racks - GE GSC3500NWW - Portable Dishwasher 5 LVL Owner's Manual

Loading the dishwasher racks ge.com
For best dishwoshing results, follow these loading guidelines. Features and appearance of rocks and silverware
baskets mag vary from gout model.
Upper Rack
The upper rack is for glasses,cups and
saucers. Cups and glasses fit best along
the sides.This is also a secure place for
dishwasher-safe plastics.The upper rack is
good for all kinds of odd-shaped utensils.
Saucepans, mixing bowls and other items
should be placed face down.
Securelarger dishwasher-safeplastics over
two fingers when possible.
Make sure small plastic items are secure so
they can't fall onto the heating element.
Lower Rack
When loading the lower rack, do not load
large platters or trablsin the front right
careenTheblmoblprevent detergent from
circulating during the wash chicle.
The lower rack is best used for plates,
saucers and cookware. Large items such as
broiler pans and racks should go along the
sides.Load platters, pots and bowls along
the sides, in corners or in the back. The
soiled side of items should face the center
of the rack.
Wash Tower
Keep the center area clear in the lower
rack.
The wash tower rises through the
center of the lower rack during the
wash and rinse portions of the cgcle.
Don't block the wash
tower or load tall things
next to it.
Be sure items don't fall
through rack and block
rotation of the sprag arm.
Also,be careful not to
let a portion of an item
such as a pot or dish
handle extend through
the bottom rack. This
could block the wash
arm and cause poor
washing results.
Silverware Basket
Put flatware in the removable basket with
fork and knife handles up to protect gour
hands. Placespoons in the basket with
handles down. Mix knives, forks and spoons
so theg don't nest together Distribute
evenlg. Small plastic items, such as
measuring spoons and lids from small
containers, should go in the bottom of the
silverware basket with silverware on top.
DON'T LET ANY ITEM EXTEND THROUGH
BOTTOM OF SILVERWAREBASKETAND
RACK,TO ENSUREPROPERFUNCTION
OF SPRAY ARM.