Download Print this page

Pioneer HTZ-77DV Setting-Up Manual page 2

Pioneer htz-77dv home theater system setting up
Hide thumbs Also See for HTZ-77DV:

Advertisement

It makes connecting the speaker cords easier if you first stick the
supplied cord labels on either end of each cord.
5m
10m
[Satellite speakers] Release the lever.
[Powered subwoofer] Pull back the lever.
SURROUND
(REAR)
Do not use the speakers with an amp other than
this system's as it may result in damage or fire.
VIDEO
IN
You can also use an S-Video cord (not
supplied) to connect the S-Video jack of this
unit to an S-Video input on your TV.
There is a Voltage Selector. Be sure this is set
110 V
correctly.
-120 V
220 V
-230 V
240 V
VOLTAGE SELECTOR
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
5m
• Always insert batteries into the battery compartment correctly
• Never mix new and used batteries.
• Batteries of the same size may have different voltages, depending
• When disposing of used batteries,
5m
The remote control can be used
within a range of about 7 meters from
the remote sensor of the display unit,
and within a 30 degree angle.
• In order to prevent battery
• Do not allow books or other objects to rest on top of the remote
• The remote control may not work if there is an obstacle between
• The remote control may not work properly if strong light such as
• The remote control may not work properly when this unit is used
• When the operating range of this remote control becomes too
Place speakers as shown below to achieve the optimum
surround sound effect.
• Install the main front left and right speakers at an equal distance
• For optimum effect, install the rear speakers slightly above ear
• This system's speakers are magnetically shielded (EIAJ), so there's
• Install the center speaker above or below the TV so that the sound
1.
2.
• When installing the center speaker on top of the TV, be sure to
3.
matching the positive ª and negative · polarities, as shown
by the display inside the compartment.
on brand. Do not mix different brands of batteries.
please comply with governmental
regulations or environmental
public instruction's rules that
apply in your country or area.
30˚
7m
leakage, remove the batteries
when not using the remote control
for an extended period (one
month or more). If leakage occurs, carefully wipe away any
battery fluid inside the compartment, and replace the batteries with
new ones.
control, since the buttons may be depressed, causing faster
exhaustion of the batteries.
the remote control and the display unit, or if the remote control is
not directed towards the remote sensor of the display unit at the
correct angle.
direct sunlight or fluorescent light is shining onto the display
unit's remote sensor.
near devices emitting infrared rays, or when remote controls of
other devices which use infrared rays are used.
On the other hand, the use of this remote control may cause other
devices to work improperly.
short, replace the batteries.
from the TV.
level.
virtually no picture color distortion when they are placed near a
TV. In the rare event that there is some picture color interference,
switch power to the TV off, and wait 15 to 30 minutes before
switching on again.
of the center channel is localized at the TV screen.
secure it with tape or some other suitable means. Otherwise, the
speaker may fall from the TV due to external shocks such as
earthquakes, endangering those nearby or damaging the speaker.
This system features a demonstration display. When the demo
mode is on, the demo display automatically starts after the system
is plugged in, or if it's inactive for more than five minutes in the
DVD/CD function.
Change menu options using the 2 and 3 buttons. Press
to select the currently displayed option.
5
The system returns to standby.
Dry cell batteries (size AA/
R6P) x 2
ª
·
30˚
2 3
5 ∞

Advertisement

loading