Table of Contents
Advertisement
If you take a picture while looking through the viewfinder
Caution
when the focus mode is set on Macro and Super Macro, the
range of the resulting picture will differ from what was seen
in the viewfinder.
Be sure to check the image on the LCD monitor.
Manual Focus
When the mode is set to
is enlarged to full screen on the LCD monitor for focus adjust-
ment. Use the four-way controller to adjust the focus while
watching the indicator on the monitor.
After the focus is set, press any buttons except the four-way con-
troller (
The screen returns to the normal display two seconds later.
• The central portion of the picture is not enlarged when the
memo
digital zoom is enabled.
Saving the Focus Mode
Changing the Focusing Point
In autofocus mode, you can change the focusing point by mov-
ing the autofocus area.
z
x
38
For distant focus
For closer focus
) or take a finger off from the four-way controller (
In focusing area mode, press the four-way controller
(
) to move the autofocus area.
Press the shutter release button.
To return the autofocus area to its original location, press
the
button again.
, the central portion of the picture
p.74
).
Advertisement
Table of Contents
