Creating And Removing Groups - HP Photosmart c500 User Manual

Creating and Removing Groups

To create a new group:
1. Turn the camera on and turn the camera mode dial to Rev.
2. Select a photo or mark the photos you want to group together. See "Marking Photos" on page 70 for more
information.
3. Press the Menu button.
4. Use the 4-way arrow button to scroll to Group.
5. Press the Create button (left soft key).
Note: The Create button is available only when there are no existing
groups. If there are existing groups, press the Add button (left
soft key), then press Create New (center soft key).
6. Name the new group. Group names must be eight characters or less and cannot contain spaces.
• Use the up and down sides of the 4-way arrow button to scroll to the letter you want to use.
• Use the right side of the 4-way arrow button to add a letter to the name.
• Use the left side of the 4-way arrow button to delete a letter from the name.
Note: The camera does not accept group names that begin with BR or TL because these letters are reserved,
regardless of language, for identifying Burst and Timelapse photos on the memory card.
HP PhotoSmart C500 Digital Camera User's Guide
Using Review Mode
76