Cisco Linksys NMH410 User Manual page 42

Chapter 7
Change System Date
Current Media Hub Date
•
are displayed.
There are two ways to change the date, the calendar or
drop-down menus.
• Calendar Use the arrow buttons to move to the
correct month. Then select the correct day.
Year
• Select the correct year.
Month
• Select the correct month.
Day
• Select the correct day.
Hour
• Select the correct hour (displayed in 24-hour
format).
Minute Select the correct minute.
•
Click Submit to save your changes, or click Cancel to
cancel your changes.
Device Language The current language of the Media
Browser and web-based utility is displayed.
Change
Click this option to change the language.
Select Language
Select Language
• Select the appropriate language.
Click Submit to save your change, or click Cancel to
cancel your change.
Firmware Update: Latest Firmware Version
available firmware version of the Media Hub is displayed.
Update Click this option to update the firmware.
NOTE: An active Internet connection is required.
Media Hub
The current date and time
The latest
Advanced Configuration
Update Firmware
The Media Hub will search for the latest version.
Click Update to begin the firmware update, or click
Cancel to cancel the update.
WARNING: Do not reboot or power off the
Media Hub during the firmware upgrade, which
may take up to 15 minutes.
Remote Reboot If you want to reboot the Media Hub,
click Reboot.
Confirm Reboot
Click Yes to reboot the Media Hub, or click No to cancel
the reboot.
38