Installing A Network Driver; Netware 4.0 Server Drivers; Table 4-1. Configuration Setting Options - Dell OptiPlex Gs Reference And Installation Manual

Table 4-1. Configuration Setting Options

Configura- Default
tion Setting Option
I/O base 300h
address
IRQ line 10
Boot PROM Disabled
Transceiver On-board
type twisted
pair
*
Network DOS
driver client
Maximum 9600
modem speed baud
(fastest
modem
installed)
Plug and Play Enabled
* Do not change this configuration setting from its
default option.
NOTE: For the full name of an abbreviation or acronym
used in this table, see the Glossary in the online System
User's Guide.
4-4 Dell OptiPlex Gs and Gs+ Low-Profile Systems Reference and Installation Guide
Available Options
200h, 210h, 220h,
230h, 240h, 250h,
260h, 270h, 280h,
290h, 2A0h, 2B0h,
2C0h, 2D0h, 2E0h,
2F0h, 300h, 310h,
320h, 330h, 340h,
350h, 360h, 370h,
380h, 390h, 3A0h,
3B0h, 3C0h, 3D0h,
3E0h
3, 5, 7, 9, 10, 11,
12, 15
Disabled, 8 KB,
*
16 KB, 32 KB
On-board coax
(BNC), on-board
twisted pair (RJ45),
external (AUI/DIX),
autoselect
DOS client, Windows
or OS/2 client, server
No modem; 1200;
2400; 9600; 19,200;
38,400 baud
Enabled, disabled
7. Repeat steps 5 and 6 for any other configuration
settings you want to change.
8. When you have made all your changes, press
< > until is highlighted. Then press
TAB OK
< >.
ENTER
9. To exit the Install program, select
menu bar.
I
nstalling a Network Driver
If your system is configured as a DOS ODI client work-
station connected to a NetWare server, the drivers are
installed automatically by following the steps in "Using
Install in a Novell NetWare Environment" found earlier
in this chapter. For other network operating systems, you
must install the appropriate network driver by following
these steps:
1. Complete steps 1 through 4 in "Configuring the
NIC" found earlier in this chapter.
2. At the Main Menu, select
press < >.
ENTER
3. Select the appropriate driver for your network
operating system, and specify the drive and direc-
tory where you want it installed.
4. Instructions for configuring the drivers are con-
tained in text (.txt) files in the c:\dell\3com directory
and its subdirectories. For a list of files, type
dir/s *.txt and press <
Most of these files can be displayed from within the
Install program by selecting the menu option to
which they pertain. For additional instructions, see
the documentation that accompanied your network
operating system.

NetWare 4.0 Server Drivers

In addition to workstation drivers, your NIC software
includes a NetWare 4.0 server driver and five NetWare
Loadable Modules (NLMs) that allow the NetWare
server driver to be used with NetWare 3.1x software.
from the
QUIT
and
NETWORK DRIVERS
>.
ENTER