Recovering The Configuration Settings - HP dx7400 - Microtower PC Utility Manual

2

Recovering the Configuration Settings

Recovering the configuration settings established in the Computer Setup (F10) Utility requires that you
first back up the settings before a recovery is needed.
The CMOS Save/Load utility can be found at
for your specific model. Download the firmware files into a folder on a removable storage device. It is
recommended that you save any modified computer configuration settings to a diskette, a USB flash
media device, or a diskette-like device (a storage device set to emulate a diskette drive) and save the
diskette or device for possible future use.
ENWW
http://www.hp.com under the Software & Driver Downloads
11