HP L2301w - Widescreen LCD Monitor User Manual page 24

Table 4-2 OSD Menu (continued)
Icon
18 Chapter 4 Operating the Monitor
Main Menu Submenu
Custom Scaling
Sharpness
Dynamic Contrast Ratio Turns Dynamic Contrast Ratio On or Off. The factory
OSD Control
Horizontal OSD
Position
Vertical OSD Position
OSD Transparency
OSD Timeout
Management
Power Saver
Power On Recall
Mode Display
Description
Selects the method on how displayed information on
the monitor will be formatted. Select:
●
Fill to Screen - image fills the entire screen and
may look distorted or elongated because of non-
proportional scaling of height and width
●
Fill to Aspect Ratio - image is sized to fit the
screen and maintains proportional image
Adjusts the screen image to look sharper or soft.
default is Off.
Provides a menu for adjusting the on-screen display
(OSD) controls.
Changes the viewing position of the OSD menu to the
left or right area of the screen. The factory default
range is 50.
Changes the viewing position of the OSD menu to the
top or bottom area of the screen. The factory default
range is 50.
Adjust to view the background information through the
OSD.
Sets the time duration in seconds that the OSD is
visible after the last button is pressed. The range is 5
– 60 seconds. The factory default is 30 seconds.
Selects the OSD and power management features of
the monitor.
Enables the power saving feature. Select:
● On
●
Off
The factory default is On.
Restores power to the monitor following an
unexpected removal of power. Select:
●
On
●
Off
The factory default is On.
Displays the resolution, refresh rate and frequency
information on the screen each time the OSD Main
Menu is accessed. Select:
● On
● Off
The factory default is On.
ENWW