Linksys WAP54G - Wireless-G Access Point User Manual page 10

Chapter 2
Add a Guest
1. On the Wireless Guard Member Website home screen,
click the Network Admin tab.
Home
Network Administration screen will appear.
2. The
Under Network Administration, click Modify Access
Control.
Network Administration
Modify Access Control screen will appear. Under
3. The
Guests, click Add Guest.
Modify Access Control
Wireless-G Access Point
Add Guest screen will appear. Enter the Guest User
4. The
Name, Guest First Name, Guest Last Name, Password,
Password Verify, and Access Duration. Then click
Submit.
Add Guest
Guest User Name
Enter a user name of the guest you
want to add.
Guest First Name Enter the first name of the guest
you want to add.
Guest Last Name Enter the last name of the guest
you want to add.
Password
Enter a password that's at least six
characters long for the guest you want to add.
Password Verify Enter the password again.
Access Duration Enter the length of time (in hours)
that the guest will be on the network.
5. The guest will need to install the Linksys Wireless
Guard Client software on his or her PC. The software
can be downloaded from the Setup CD-ROM or from
www.linksys.com/support. Refer to Client Software
Installation, page 6.
Configuration
9