Dial Mode - VTech CS5211 User Manual

Telephone settings
Ringer volume (continued)
1. When the handset is not in use, press and hold
and the current setting. The current setting flashes.
/VOL- or
2. Press
CID
volume level as you scroll through the choices.
Press SELECT or PROG to save your selection. You will hear a confirmation tone.
3.
If the ringer volume is set to OFF, RINGER OFF is displayed on the idle screen.
•
When the ringer volume is set to OFF, the handset still rings when you press FIND HANDSET.
•

Dial mode

If you have touch-tone service, the telephone is ready to use as soon as the battery is charged. If you have pulse
(rotary) service, you need to change the dial mode setting to pulse.
To change the setting:
1. Press PROG when the handset is not in use.
2. Press CID/ or
VOL-
press SELECT. The current setting flashes.
CID/
3. Press or
VOL-
Press SELECT or PROG to save your selection. You will hear a confirmation tone.
4.
5. Press OFF to return to idle mode.
/VOL+ to adjust ringer volume from OFF, LOW or HI. You hear a sample of the selected
/ until the screen displays DIAL MODE: and the current setting, then
VOL+
/ to select TONE or PULSE
VOL+
CID/ or / until the screen displays RINGER VOL:
VOL- VOL+
.
11