Preparing The Monitor For Wall-Mounting - HP FV588AA User Manual

3. Lift the monitor to an upright position and place on a flat, stable surface.
Monitor in upright position

Preparing the monitor for wall-mounting

WARNING: To reduce the risk of personal injury or of damage to the equipment, check that the wall-mounting
fixture is adequately installed and secured before attaching the monitor. Refer to the instructions supplied with the
wall-mounting fixture and check that it is capable of supporting the monitor.
1.
Disconnect the power cable and any other cables from the monitor.
2. Place the monitor face down on a flat, protected surface.
3. Remove the four screws that fasten monitor base to the monitor.
Location of screws securing base to monitor