HP FV588AA User Manual page 26

Main Menu
Icon Options
Management
(continued)
Information
Factory Reset
Submenu Options
Sleep Timer
Default Video Input
Current Settings
Recommended Settings
Serial Number
Version
Backlight Hours
Service Support
Description (Continued)
Provides the timer-adjustment menu options:
Set Current Time — Sets the current time in hours and minutes.
Set Sleep Time — Sets the time you want to place the monitor
in sleep mode.
Set on Time — Sets the time you want the monitor to wake up
from sleep mode.
Timer — Sets the Sleep Timer feature On or Off; the default
setting is Off.
Sleep Now — Immediately sets the monitor to enter
sleep mode.
Selects the default video input signal when the monitor is
connected to two active and valid video sources. The default is
DVI. You must restart the computer to have the change take
effect.
Selects and displays important information about the monitor.
Provides the current input video mode.
Provides the recommended resolution mode and refresh rate for
the monitor.
Reports the serial number of the monitor. The serial number is
needed if contacting HP technical support.
Reports the firmware version of the monitor.
Reports the total hours of backlight operation.
For service support, go to: http://www.hp.com/support
Returns settings to factory defaults.