Epson FX 890 - B/W Dot-matrix Printer Service Manual page 77

7. The carriage width select menu appears. Move the cursor using " " or " " key to select the
carriage width and press "Return" key.
The carriage width to be selected is as follows:
FX-1180:
FX-880:
8. The main menu appears. Move the cursor using " " or " " key to select "(2) FF paper" from
the list and press "Return" key, and the test pattern printing starts.
9. After the test pattern is printed out, turn the printer off once to write the factory setting into the
EEPROM.
10. Press "ESC" key several times to quite the program.
T T
CAUTION
T T
Rev.B
(3) 136 columns
(1) 80 columns
Program : xxxxx
9 pins VR 0 = x
[ Carriage Width ]
>(1) 80 column
(2) 106 column
(3) 136 column
Program : xxxxx
9 pins VR 0 = x
[ Main Menu ]
(1) Bi-D Adjust
>(2)FF paper
(3) ---- N/A ----
As this adjustment program is same as the check program in the
factory and includes many other check items which are not needed
for service, you should not perform any items which are not
described in this manual. Otherwise, the printer functions are not
guaranteed.
The factory setting value is not written into the EEPROM without this
FF paper printing.
FX-1180/FX-880 Service Manual
Setting:
VR 1 = x VR 2 = x
** In line**
Setting:
VR 1 = x VR 2 = x
** In line**
(6) Envelope
(7) SUB MENU
Chapter 5 Adjustment
5-5