Printhead Removal - Epson FX 890 - B/W Dot-matrix Printer Service Manual

4.2.1 Printhead Removal

1. Remove the top cover.
2. Remove 2 CBS (M3
3. Disconnect the head FFC from the printhead and remove it.
T T
WARNING
T T
After replacing the printhead, perform the platen gap adjustment. (Refer
to Chapter 5.)
Rev. B
8) screws attaching the printhead to the carriage assembly.
Before disassembling or assembling the printhead, disconnect the
power supply cable from the AC power socket. Failure to do so might
cause personal injury.
Be careful with the printer when you handle it, as it may be very hot
right after printing.
Figure 4-2. Printhead Removal
FX-1180/FX-880 Service Manual
Chapter 4 DISASSEMBLY AND ASSEMBLY
4-5