Download Print this page

EAW LS432 Specifications page 2

Eaw loudspeaker specifications

Advertisement

DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
CABINET TO BE SYMMETRICAL ABOUT CENTERLINE DESIGNATIONS.
LS432
MOUNTING POINT 1/4-20 THREADED HOLE.
CENTER OF BALANCE.
4.25
6.25
2.63
L C
2.00
L C
INPUT
7.00
1.59
2.00
FRONT
BACK
Acoustic Performance Partnership
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
6.03
13.67
L C
C L
1.13
TOP/BOTTOM
3
SIDES
510694 (1)
exp 8/24/98 shb
Eastern Acoustic Works
SPECIFICATIONS LS432
A & E SPECIFICATIONS
The two-way full range loudspeaker systems shall incorpo-
rate four 4-in LF transducers and three 1-in soft dome tweeter
HF transducer.
All seven drivers shall be mounted in a vertical column to
create a line source. The LF drivers shall be mounted two
each above and below the three HF drivers. An internal fre-
quency shading filter set shall maximize beneficial line source
coupling while minimizing grading lobes. An internal pas-
sive filter network shall provide fourth order acoustical cross-
over and system equalization between the low and high fre-
quency sections.
System frequency response shall vary no more than 3 dB
from 200 Hz to 20 kHz measured on axis. The system shall
produce a Sound Pressure Level (SPL) of 95 dB SPL on axis at
1 meter with a power input of 1 Watt, and shall be capable
of producing a peak output of 122.8 dB SPL on axis at 1
meter. The system shall handle 150 Watts of amplifier power
(AES Standard) and shall have a nominal impedance of 8
Ohms.
The loudspeaker enclosure shall be rectangular in shape with
a convex arc to the front baffle. It shall be constructed of 1/
2-in thickness void-free cross-grain-laminated Baltic birch
plywood and shall employ extensive internal bracing. It shall
be finished in black catalyzed polyurethane. Input connec-
tors shall be two-terminal barrier strip. A total of 8x 1/4"-20
threaded mounting points (1 each top, bottom and sides, 4
back) shall be provided. The front of the loudspeaker shall
be covered with a vinyl coated perforated steel grille.
The 2-way full range loudspeaker shall be the EAW model
LS432.
LS432

Advertisement

loading