Canon 1236B001 - EOS Digital Rebel XTi Camera SLR Instruction Manual page 46

List of Repair Functions
Full screen display/returns to normal
screen
Sets the size of the dust erasure
range (you can also enter a
numerical value).
Restores/redoes the image.
Copies the dust erasure range and
applies (pastes) it to a separate image.
Switches between
* Operates when you have selected multiple images and the copy
stamp window is displayed.
You can apply the dust erasure in the same place in multiple
images using the [Copy] and [Paste] buttons.
Even if you have saved by performing "Adding a Recipe and Save"
(p.28), a dust-erased image is not created, merely information about
dust erasure processing is saved to an image. You must convert to
a JPEG or TIFF image and save it (p.29).
A dust-erased image does not change, merely dust erasure
information is saved to the image. For that reason, you can return
an image to its original condition at any time (p.28).
Check dust-erased images in the copy stamp window. You cannot
check them in other windows.
[Radius] that sets the dust erasure range can be set in a range of
5 to 100 (in one pixel units).
Spots of dust can be erased with the repair function. There may
be cases where you will not be able to erase lines of dust. If this
occurs, erase the dust with the copy stamp function (p.46).
When you have erased several dust spots in an image, press the
<B> key to display the previous dust-erased spot and the <F> key
to display the next dust-erased spot successively.
To switch between full screen display/normal screen display,
press the <
images.*
You can also press the <esc> key to return the full screen display
to the normal screen display.
> + <F11> keys.
Introduction
Contents at
a Glance
1
Basic
Operation
2
Advanced
Operation
Advanced
3
Image Editing
and Printing
Processing
4
Large Numbers
of Images
5
Editing JPEG
Images
Reference
Index
45