Download Print this page

Advertisement

7.
Replace the four screws in the bottom of the carrier to hold the drive securely in place.
Figure 2-36
8.
Place the thermal sensor on top of the hard drive in a position that does not cover the label (1) and
attach the thermal sensor to the top of the hard drive with the adhesive strip (2).
Figure 2-37
ENWW
Replacing the Security Screws
Replacing the Thermal Sensor
Installing Additional Drives
41

Advertisement

   Related Manuals for HP dc7900 - Convertible Minitower PC

This manual also for:

Compaq dc7900 series

Comments to this Manuals

Symbols: 0
Latest comments: