Download Print this page

Advertisement

Figure 2-24
Extra Optical Drive M3 Guide Screws Location
CAUTION:
To prevent loss of work and damage to the computer or drive:
If you are inserting or removing a drive, shut down the operating system properly, turn off the computer,
and unplug the power cord. Do not remove a drive while the computer is on or in standby mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid
touching the connector. For more information about preventing electrostatic damage, refer to Appendix
D,
Electrostatic Discharge on page
57.
Handle a drive carefully; do not drop it.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields
such as monitors or speakers.
If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label
the package "Fragile: Handle With Care."
32
Chapter 2 Hardware Upgrades
ENWW

Advertisement

   Related Manuals for HP dc7900 - Convertible Minitower PC

This manual also for:

Compaq dc7900 series

Comments to this Manuals

Symbols: 0
Latest comments: