Removing The Computer Access Panel - HP dc7900 - Convertible Minitower PC Hardware Reference Manual

Convertible minitower business pc
Hide thumbs Also See for dc7900 - Convertible Minitower PC:
Table of Contents

Advertisement

Removing the Computer Access Panel

1.
Remove/disengage any security devices that prohibit opening the computer.
2.
Remove all removable media, such as diskettes or compact discs, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
long as the system is plugged into an active AC outlet. You must disconnect the power cord to
avoid damage to the internal components of the computer.
5.
Lay the computer down on its large base for greater stability.
6.
Lift up on the access panel handle (1), slide the access panel back about 1.25 cm (1/2 inch), then
lift it up and off the unit (2).
Figure 2-2
ENWW
Regardless of the power-on state, voltage is always present on the system board as
Removing the Computer Access Panel
Removing the Computer Access Panel
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq dc7900 series

Table of Contents