Table of Contents
Advertisement
Connecting the YPbPr Component Video Input
1. Connect the VIDEO IN (COMPONENT) jacks on the display to the component
output jacks on an A/V device (such as a VCR or DVD player) using a component
video cable.
2. Connect the DVD player's audio output jacks to the AUDIO IN (AUDIO2 or AUDIO3)
jacks on the display using a suitable audio cable.
3. To view video image from this input, press the
Audio cable
*The cables are not supplied and should be purchased separately.
Note:
Connector locations on the control panel may differ depending on the model.
Setting Up the Display
YPbPr
button on the remote control.
Component video cable
DVD player / VCR
13
Advertisement
Table of Contents
