Table of Contents
Advertisement
Checking, displaying and exporting itineraries
Survey
One place up
One place down
Adding route points...
Delete stage
Display stage point
Displaying and
calculating the
corridor...
Additional software: MapExport
You may plan as much itineraries as you want, e.g. for holidays,
in order to use them later for navigation purposes.
At any moment, you may add stage points, change their order or
display an itinerary on the map.
The following commands are available:
Click the One place up icon to navigate to the respective stage
point earlier (example: stage 3 becomes stage 2).
Click the One place down icon to navigate to the respective
stage point later (example: stage 2 becomes stage 3).
Determine other route points and add them to the list of route
points.
For details, please refer to "Defining the stage points of an
itinerary", page 81.
Click the Delete stage point icon to delete the respective stage
point.
Click the Display stage point icon to display the respective
stage point on the map.
Click the Display corridor icon to display and to calculate the
route with its corridor.
The route will be highlighted in blue, the corridor and the circles
around the stage points in transparent gray. The stage points will
be indicated by small flags.
User's manual OnCourse Navigator | 4
- 85 -
Advertisement
Table of Contents
