Table of Contents
Advertisement
2.2.5
Installation in the vehicle
Survey
Mounting and connecting the Pocket PC
Connecting the
Pocket PC...
Installation and quick-start guide
Mount the holder of the Pocket PC and the GPS receiver before
you use the navigation system. You will also have to initialize the
GPS receiver.
Notice: The holder and the adapter of the Pocket PC are not
supplied within the delivery.
Attention: The mounted holder must not impede the driver's
attention on the traffic. If this is not possible, mount the holder
somewhere else so that safe driving is granted.
1. Attach the cradle of the Pocket PC to the swan-neck mount.
Notice: Take notice of the inscription on the swan-neck
mount. The arrow with the inscription close must show in
snap-on direction. The connection must snap on audibly.
2. Place the suction cup on the windscreen. Press the lever
firmly to the windscreen before switching it.
3. Put the Pocket PC into the cradle. Make sure that it is held
safely!
4. Plug the adapter into the socket at the bottom of the
Pocket PC.
User's manual OnCourse Navigator | 4
- 16 -
Advertisement
Table of Contents
Need help?
Do you have a question about the OnCourse Navigator 4 and is the answer not in the manual?