Hardware Features; Front View - Toshiba Canvio HDNB120XKEG1 User Manual

®
The Canvio Personal Cloud has a set of LEDs which are used as optical indicators to
reflect the available storage capacity and the condition of the Canvio
The LEDs are numbered from #1 to #5 (beginning from the bottom to the top).
Colors
LEDs #1 thru #4 are white.
•
LED #5 is amber.
•
Power Status
On: LED #1 is steady on
•
Active: LED #1 flashes on and off with drive activity
•
Low-power (sleep) mode: LED #1 will flash slowly
•
(1 second on and 2 seconds off)
Filled Storage Capacity (Fill Gauge)
Fill Gauge (range in percentage) Corresponding LED(s) lit
Less than 30%
30% - 50%
50% - 70%
70% - 90%
More than 90%
Timer-controlled HDD Sleep Mode
®
By default, the Canvio
1. To enable this feature, click SETTINGS. (Refer to the
Information).
2. Under ENABLE HDD STANDBY, move the switch to ON.
This will save the power used by the Canvio
be accessing the device frequently.
After 10 minutes of inactivity, the HDD will enter into sleep mode.
If the device is in sleep mode, it will take up to 30 seconds to wake up and respond to the first request. It
will respond normally to subsequent requests, until the next period of 10 minutes of inactivity.
Copyright © 2012 Toshiba

Hardware Features

Front View

#1
#1, #2
#1, #2, #3
#1, #2, #3, #4
#1, #2, #3, #4, #5
Personal Cloud Hard Disk Drive (HDD) sleep mode feature is not enabled.
®
Personal Cloud and is a recommended setting if you will not
Canvio
®
Personal Cloud.
To View the Canvio® Personal Cloud
®
Personal Cloud
9