Sony HT-CT260 Operating Instructions Manual page 26

and pairing is performed automatically,
as described below.
TV VOL TV CH
1
Place the system and a
Bluetooth device within 1 m.
2
Press INPUT +/– to select "BT
AU."
3
Set the Bluetooth device in
pairing mode.
For details on setting the Bluetooth
device in pairing mode, refer to the
operating instructions supplied with
the device.
4
When the detected devices are
listed on the Bluetooth device,
check that "HT-CT260" is listed.
On some Bluetooth devices, the list
may not be displayed.
26
US
5
Select "HT-CT260" on the list of
devices detected on the
Bluetooth device.
If entering the Passkey is requested,
enter "0000."
6
Make the Bluetooth connection
on the Bluetooth device.
INPUT
When the Bluetooth connection is
+/–
made correctly, the
indicator lights in blue and the
pairing information is stored in the
system.
Notes
• Use a Bluetooth device such as Bluetooth
mobile phone in an easily visible place in the
same room where the Sound Bar is placed.
• If Wi-Fi equipment is used, Bluetooth
communication may become unstable. In
that case, use the Bluetooth device as close as
possible to the Sound Bar.
• Sound may be interrupted because of a
problem with the Bluetooth device.
(Bluetooth)