Sony DSC-HX10V Cyber-shot User Manual page 121

Fluorescent (Green-tinged)
Incandescent (Reddish)
Notes
When shooting with a flash in other than [Flash] mode, [White Balance] is set to [Auto].
When [Flash] is [On] or [Slow Synchro], the white balance can only be adjusted to [Auto], [Flash],
[One Push] or [One Push Set].
[One Push Set] cannot be selected while charging the flash.
To capture the basic white color in [One Push Set] mode
1. Frame a white object such as a piece of paper filling the screen under the same lighting conditions
as you will shoot the subject.
2. MENU
(White Balance)
The screen momentarily turns black, and when the white balance has been adjusted and stored in
the memory, the recording screen is displayed again.
Notes
If the indicator flashes while shooting, the white balance is either not set or cannot be set. Use
automatic white balance.
Do not shake or strike the camera while [One Push Set] is in progress.
When flash mode is set to [On] or [Slow Synchro], the white balance is adjusted to the condition
with the flash emitting.
Related Topic
MENU items not available in some REC modes
Copyright 2012 Sony Corporation
[One Push Set] on the control wheel
Back to top