Sony LocationFree LF-PK1 Quick Start Manual page 31

Configure the video settings
Configure the on-screen remote control
■
for video
(For connecting to external devices, as
instructed in 3 of STEP 1 on page 9)
You can adjust settings for the on-screen remote control that will
be used to operate external devices such as STB or PVR that are
connected to the Base Station. To adjust these settings, Memory
Stick Duo™ media is required.
1
Press the button during video playback.
Select from the LocationFree Player
control panel, and then press the
2
Select [Remote Control Settings], and then
press the button.
3
Select [Video 1] or [Video 2] for the connected
external device you want to use the remote
control for, and then press the
4
A message appears indicating that you need
to download remote control data. Select [Yes],
and then press the
Follow the on-screen instructions to download remote
control data onto Memory Stick Duo™ media.
button.
button.
button.
5
After downloading, reconnect to the Base
Station.
6
Perform Step 1 to 3 again.
7
Select the manufacturer of the connected
external device, and then press the right
button.
8
Select the product type of the connected
external device, and then press the right
button.
9
Test the remote control to make sure it works,
and then press the right button.
By selecting [Power] and then pressing the
can turn the external device on and off.
In some cases it may take as long as 5 seconds for the
external device to turn on after you press the
10
Save your settings.
Press the button to save settings on the PSP™ system.
Notes
• Even if the power turns on and off correctly with [Power], other
buttons may not be enabled. If this happens, select [Video 1] or
[Video 2] from the Index. With the on-screen remote control,
confirm that the buttons are enabled.
• Try all the models that appear on the screen to select the most
suitable on-screen remote control for the connected devices.
GB
button, you
button.
Continued
27 (GB)