To Create A New Department Data - Sharp XE-A407 User Manual

The department code input dialog appears.
2. Input the code of a department you want to see in the textbox.
Click [OK].
Data with the selected code are shown on the department screen.
You can also change the department code selection with the [<] button or [>] button.
(7) Get from SD
Click this button to read the department setting data from an SD memory card.
(8) Send to SD
Click this button to write the department setting data to an SD memory card.
● To create a new department data
You can create new department data with the following procedure.
1. Click [Record], and then [New].
You can also create data by right-clicking on the list of department data and
then clicking [New Record].
The department code input dialog appears.
2. Input a department code in the textbox.
3. Click [OK].
New department data is created.
Notice
If you input an already existing department code, an error message appears. Click [OK] to close the
error message box, and follow the procedure above from Step 2.
15
3
1
1
2
3
2
1