How To Use Arm Band : Based On Left-Arm Use (Hmx-W350 Only) - Samsung HMX-W300BN User Manual

Additional information
HOW TO USE ARM BAND : BASED ON LEFT-
ARM USE (HMX-W350 ONLY)
1
Insert and loop the velcro strip (from opposite end to the logo)
through the left ring (viewed from the rear side of the holder) as
shown below and fasten it.
2
Adjust the anti-slip ring as shown below, to prevent getting
loose.
Anti-slip ring
3
Insert and loop the other end of the strip from behind the holder
ring, and fasten the velcro.
After the 1st step
98
Appendixes
Loosen the band enough before wearing, and adjust it to fit
appropriately.