Mobile Hotspot Home Page; Internet Connection - Samsung SCH-LC11R User Manual

Mobile Hotspot Home Page

The Mobile Hotspot web portal Home page lists the following
basic status information and options:

Internet Connection

Received: For the current Internet connection, the amount of data
•
received from your Wireless Provider's network.
IP Address: Internet Protocol address assigned to your Mobile
•
Hotspot.
Transmitted: For the current Internet connection, the amount of data
•
sent to your Wireless Provider's network.
Mask: The network mask associated with the IP address.
•
Connected Time: For the current Internet connection, the period of
•
time which has elapsed since the connection was established.
Gateway: The gateway IP address associated with the IP address
•
above.
Connect/Disconnect button: Changes connection state with your
•
Wireless Provider's mobile data network. Shows Disconnect when the
Mobile Hotspot is connected to your Wireless Provider's mobile data
network. Shows Connect if your Wireless Provider's mobile data
network is available but the Mobile Hotspot is not connected to it.
DNS: The Domain Name Server currently used by your Mobile Hotspot.
•
14
WLAN
Profile: The Wi-Fi (802.11) profile currently in use. (The default Profile
•
is Secure.) You can change this setting by selecting a different profile,
and clicking the Apply button next to the profile list.
Apply button: Click or touch to save any change to the current WLAN
•
Profile. Select the desired profile, then click or touch this button.
Note: Changing the current profile will disconnect all the current Wi-Fi
clients, including yours. You will need to reconnect using the Wi-Fi
settings for the new profile.
Network Name: The SSID (network name) used by the current profile.
•
IP Address: The IP address of this device, as seen by devices on the
•
WLAN (802.11 wireless network).
Security: The security method used by the current profile.
•
Mask: The network mask associated with the IP address above.
•
Users: The number of users (wireless clients) connected to this device,
•
and the number of wireless clients allowed. This is presented in the
form number connected /number allowed.